Question 1

How much does fence installation cost in Victoria?

Accepted Answer

A standard 6 ft cedar privacy fence typically runs $45–$75 per linear foot installed, depending on terrain, post depth, style and whether an old fence needs removal. Horizontal slat and mixed-material builds with columns cost more. On-site estimates are free and itemized.

Question 2

Do I need a permit to build a fence in Victoria or Saanich?

Accepted Answer

Most residential fences up to 1.83 m (6 ft) in side and rear yards do not require a permit. Front-yard fences and corner-lot sight triangles are usually limited to about 1.2 m. We confirm your municipality's exact bylaw before starting.

Question 3

How deep do fence posts need to be?

Accepted Answer

At least one third of the above-ground height — 24" to 36" for a 6 ft fence — set in concrete over a gravel drainage base. Shallow posts are the number one cause of leaning fences on the Island.

Question 4

What wood lasts longest for fences in Victoria's climate?

Accepted Answer

Western red cedar for the visible boards, pressure-treated for anything in ground contact. Cedar handles our wet winters well and lasts 15–25 years with staining every two to three years. Steel post inserts or standoff bases extend the life further.

Question 5

Can you build on a slope or rocky ground?

Accepted Answer

Yes. Sloped runs are either stepped or racked depending on the style you want, and on rock we drill and pin posts rather than digging. Both add time, and both are priced into the quote up front.

Fence Installation & Privacy Screens — Victoria, BC